Bronze CDA 65500
Specs: ASTM-B-98 ASTM-B-124
Silicon Bronze C65500 (Bronze CDA 65500) is comprised of 95% Copper, with 4% Silicon and 1% Manganese to combine high strength and good hot and cold formability with excellent welding characteristics. Additionally, Silicon Bronze 65500 exhibits good resistance to corrosion by brine and sulfite solutions, non-oxidizing inorganic acids, alkalis, and other mixtures. The mechanical and chemical properties of Silicon Bronze 65500 are similar to those of stainless steel.
Silicon Bronzes are commonly used in pump and valve components, fasteners, piston rings, and marine hardware industries.
Silicon Bronze C65500 (CuSi3Mn1) is a wrought single α phase alloy with additions of silicon and manganese to increase the strength.
The alloy can be strengthened by heat treatment, resulting from an age-hardening process in which Manganese silicides are precipitated from a solid-solution, copper-rich matrix. This alloy can be further strengthened by cold work prior to the precipitation process and again following heat treatment. This enables the alloy to be supplied in various tempers from half hard to extra hard depending on the final application.
Bronze C65500 being primarily a single-phase alloy of high copper content exhibits excellent corrosion properties in seawater and other polluted water systems.
It also has anti-bio-fouling properties in seawater and exhibits antimicrobial properties against many harmful microbes. Recently, Bronze C65500 was proven to have anti-microbial applications in hospital environments to combat the spread of viral bacteria and, as a result, has been registered by the Environment Protection Agency.
The alloy has excellent cold working and good hot working properties and can be joined by standard welding, brazing, and soldering techniques.
Available shapes – round
- Bridge Bearing Plates
- Bolts and Nuts
- Pole Line Hardware
- Cotter Pins
- Heat Exchange Tubes
- Piston Rings
- Screen Cloth and Wire
- Bushings and Bearings
- Hydraulic Pipelines
- Propeller Shafts
- Maine Hardware
Get a quote for Bronze CDA 65500
Specifications of Bronze CDA 65500
|Tube & Pipe
Welded & Seamless
|Sheet & Plate||Strip||Rod, Bar
|UNS C65500||ASTM B 315||ASTM B 96||ASTM B 96||ASTM B 98
ASTM B 96
ASTM B 283
|ASME||ASME SB 96|
|EN 12163||EN 12166|
British Standard Military
|CS 101||BS 2875||BS 2874|
|QSi3-1||GB 2047||GB 2065||GB 4431||GB 3123|
|AS 1566||AS 1566||AS/NZ 1566||AS/NZ 1573|
Mechanical Properties of Bronze CDA 65500
|Rod & Bar||H04
|<=0.25” (<=6.35mm) >0.25-1” (>6.35-25.4mm)
Physical Properties of Bronze CDA 65500
|Physical Properties||Imperial Units||Metric Units|
|Hot Working Range||970-1025 ºF||705-760 ºc|
|Mean Liner Expansion 20-300ºc||0.018 ºc x10-³|
|Mean Liner Expansion 68-572 ºF||0.0010 ºF x10-³|
|Specific Heat||0.090Btu/lb/ ºF @68ºF||377J/kg ºK @20 ºc|
|Thermal Conductivity||21Btu /ft²/fth ºF @68ºF||36W/m. ºK|
|Electrical Resistivity||9.68µ_in||24.6 μΩcm|
|Electrical Conductivity||7% IACS @68ºF||0.04MS/cm@20 ºc|
|Modulus of Elasticity 10³|
While the data is believed to be accurate, Wieland Diversified makes no representation or warranty of any kind (expressed or implied) and assumes no responsibility with respect to the accuracy and values shown above; this information should only be used as a guide.
As part of the Wieland Group since 2018, Wieland Diversified will be able to continue to provide its customers with the quality and service they have come to expect. Learn more at Wieland.com
49 Main Street
PO Box 65
Monson, MA 01057
p (800) 628-3035
p (413) 267-5101
f (413) 267-3151
Copyright 2021 © Wieland